CCMT carbide lathe insert is made of ultra-fine cemented carbide raw material, finely ground and sintered at high temperature, so that the blade has high hardness, good toughness and high temperature resistance, so that the wear resistance of the rear face of the blade is stronger, the overall impact resistance is strong, and the blade is not easy to collapse; The blade is sharp, the four corners are available, the chip breaking and chip removal are smooth, and the processing efficiency is improved; The supply of goods is sufficient and the models are complete, so that you can use them at ease without worrying about out of stock.

Specifications:

Brand	BWIN
Model	Ccmt09t304 Ccmt09t302 Ccmt060202 Ccmt060208
Color	Yellow/Fuchsia/Black//Two-color coating/Cermet coating/Brown
Workpiece	Cast iron/Steel/Stainless steel/Aluminum
Type	Internal Turning Tool
Material	Tungsten Carbide Inserts
Processing Type	Medium Cutting
Feature	German technology
	Sharp and wear-resistant
	Smooth chip removal
	Stable performance
	Strong universality
Standard	ISO
Quantity	10pcs/box
Weight	0.015kg
Package	Plastic Box
Customized Support	OEM, ODM

Lead Time:

antity(pieces)	1 - 3000	>3000
Lead time (days)	7	To be negotiated

I(mm)	d(mm)	t(mm)	d1(mm)
06	6.35	2.38	2.8
09	9.525	3.97	4.4
12	12.7	4.76	5.5

Notice:

The tungsten carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
Before installing the carbide lathe insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
After installation, it is necessary to confirm whether the central hole of the carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
When using, do not exceed the specified high speed
When the tungsten carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ

1. Flank Wear? Higher cutting resistance,Notch wear on flank,Poor roughness of surface, or deterioration of accuracy.

Soft grades,Excessive cutting speed,Small flank angle,Low feed.

Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed.

2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel

Soft grades,Excessive cutting speed,Excessive feed,The strength of chip breaker Insufficiet.

Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed,Select a higher strength chip breaker.

3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle

4. Insert Fracture? Cutting resistance increased Poor surface roughness.

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle.

5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness

Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge.

Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant).

6. Build-Up-Edge? Workpiece dissove with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials.

Cutting speed too low,Cutting edge obtuse,Unsuitable tool material. Increase cutting speed,Increase rake angle,Select small sticking force.

Product Tags:

Ccmt09t304 Lathe Turning Inserts Tungsten Carbide Precision Cutting

Tungsten Carbide Inserts

Turning Carbide Inserts

CNC Carbide Inserts

Carbide End Mill

Flat End Mill

Carbide Ball Nose End Mill

Corner Radius End Mill

Carbide Milling Cutter

Milling Carbide Insert

Carbide Lathe Insert

Carbide Grooving Insert

Carbide Threading Inserts

U Drill Insert

Roughing End Mill

Thread End Mill

Chamfer End Mill

Tungsten Carbide Drill Bits

Ccmt09t304 Lathe Turning Inserts Tungsten Carbide Precision Cutting

Ccmt060204 Ccmt09t304 Tungsten Carbide Lathe Insert Turning Cnc Precision Cutting

carbide milling insert

tungsten carbide end mill cutting tool

lathe cutting tool carbide