VCMT turning carbide inserts are made of raw materials imported from Germany, with high smoothness, sharp edge, smooth chip removal, high wear resistance, good deformation resistance. Under the same cutting conditions, it can cut quickly, without sticking to the cutter, and has high efficiency; Sharp cutting, two corners can be used, all kinds of patterns can be broken and removed smoothly, leaving the accumulated chips wrapped; High precision blade, reduce friction and wear, and improve the service life of the blade.

Specifications:

Brand	BWIN
Model	VCMT110308 VCMT110304 VCMT160408 VCMT160404
Color	Brown/Yellow/Two-color/Fuchsia/Cermet
Workpiece	Steel/Stainless steel
Type	CNC Cutting Tool
Material	Tungsten Turning Carbide Insert
Processing Type	Medium Cutting
Feature	Good red hardness
	Good process performance
	Strong universality
	High processing finish
	High stability
Standard	ISO
Quantity	10pcs/box
Weight	0.015kg
Package	Plastic Box
Customized Support	OEM, ODM

Lead Time:

antity(pieces)	1 - 3000	>3000
Lead time (days)	7	To be negotiated

I(mm)	d(mm)	t(mm)	d1(mm)
11	6.35	3.18	2.8~3.4
16	9.525	4.76	4.4

Notice:

The turning carbide inserts shall not be collided or dropped on the ground and must be handled with care.
Before installing the turning carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
After installation, it is necessary to confirm whether the central hole of the turning carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
When using, do not exceed the specified high speed.
When the turning carbide inserts is not used, hang the blade vertically on the dry shelf.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

Advantages:

1. Honest merchants, reasonable price and quality assurance

2. Large inventory, sufficient supply and high cost performance

3. Customer service responds in time and delivers goods quickly

4. Provide after-sale guarantee to make your after-sale service free

FAQ

1. Flank Wear? Higher cutting resistance,Notch wear on flank,Poor roughness of surface, or deterioration of accuracy.

Soft grades,Excessive cutting speed,Small flank angle,Low feed.

Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed.

2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel

Soft grades,Excessive cutting speed,Excessive feed,The strength of chip breaker Insufficiet.

Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed,Select a higher strength chip breaker.

3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle

4. Insert Fracture? Cutting resistance increased Poor surface roughness.

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle.

5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness

Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge.

Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant).

6. Build-Up-Edge? Workpiece dissove with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials.

Cutting speed too low,Cutting edge obtuse,Unsuitable tool material. Increase cutting speed,Increase rake angle,Select small sticking force.

Product Tags:

Vcmt 160408 Turning Carbide Inserts Stainless Steel Tool Cnc Lathe Insert

Tungsten Carbide Inserts

Turning Carbide Inserts

CNC Carbide Inserts

Carbide End Mill

Flat End Mill

Carbide Ball Nose End Mill

Corner Radius End Mill

Carbide Milling Cutter

Milling Carbide Insert

Carbide Lathe Insert

Carbide Grooving Insert

Carbide Threading Inserts

U Drill Insert

Roughing End Mill

Thread End Mill

Chamfer End Mill

Tungsten Carbide Drill Bits

Vcmt 160408 Turning Carbide Inserts Stainless Steel Tool Cnc Lathe Insert

Vcmt 110302 110304 160404 160408 Cnc Turning Carbide Insert Tungsten Stainless Tool Cermet

carbide lathe inserts

machining carbide inserts

lathe inserts carbide