RCMT turning carbide inserts adopts high-quality nano coating, which is tough, wear-resistant and stable in quality. It is widely used in rough and finish machining of alloy steel, tool steel, mold steel, castings and other materials; The imported tungsten steel base material is selected, which has the characteristics of high hardness, good wear resistance, high stability, sharp edge, good stability during cutting, high temperature resistance, thermal shock resistance, oxidation resistance, smooth chip during processing, and no sticking to the knife, so as to improve the service life of the blade; The screw offset fastening design makes the blade close to each other and increases rigidity, ensuring that the blade does not crack and is easier to process.

Specifications:

Brand	BWIN
Model	RCMT0803
Color	Yellow
Workpiece	Steel
Type	CNC Lathe Tool
Material	Tungsten Turning Cutter Blade
Processing Type	Medium Cutting
Feature	Strong impact resistance
	Low cutting resistance
	High-precision
	High efficiency
	Stable processing
Standard	ISO
Quantity	10pcs/box
Weight	0.015kg
Package	Plastic Box
Customized Support	OEM, ODM

Lead Time:

antity(pieces)	1 - 3000	>3000
Lead time (days)	7	To be negotiated

d(mm)	t(mm)	d1(mm)
8.0	3.18	3.35
10.0	3.18	3.6
12.0	4.76	4.2
16.0	6.35	5.2
20.0	6.35	6.5
25.0	7.94	7.25
32.0	9.52	9.55

Notice:

The turning carbide inserts shall not be collided or dropped on the ground and must be handled with care.
Before installing the turning carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
After installation, it is necessary to confirm whether the central hole of the turning carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
When using, do not exceed the specified high speed
When the turning carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ

1. Flank Wear? Higher cutting resistance,Notch wear on flank,Poor roughness of surface, or deterioration of accuracy.

Soft grades,Excessive cutting speed,Small flank angle,Low feed.

Select a higher,wear-resistant grade,Reduce cutting speed,Increase flank angle,Increase feed.

2. Crater Wear? Uncontrolled chip,Poor surface quality,when finishing High speed processing carbon steel

Soft grades,Excessive cutting speed,Excessive feed,The strength of chip breaker Insufficiet.

Change to a higher wear-resistant grade,Reduce cutting speed,Reduce feed,Select a higher strength chip breaker.

3. Chipping? Sudden fracture of cutting edge(rake face and flank),Instability insert life

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle

4. Insert Fracture? Cutting resistance increased Poor surface roughness.

Toughness insufficient,Excessive feed rate,Strength of cutting edge insufficient,Instability of the tool.

Select a tougher grade,Decrease feed rate,Increase honing of cutting edge(chamfering to rounding),Increase the stability and setting angle.

5. Plastic Deformation? Variation of dimension Nose wear,cutting edge drape or passivating.when processing alloy steel Poor surface roughness

Soft grade,Excessive cutting speed,Excessive cutting depth and feed rate,Overheat on cutting edge.

Select a higher red hardness cutting material,Decrease cutting speed,Decrease cutting depth and feed rate,Select a higher thermal conductivity cutting material(CVD+sufficient coolant).

6. Build-Up-Edge? Workpiece dissove with Cutting edge Poor surface roughness when finishing,Cutting resistance increased,Cutting soft materials.

Cutting speed too low,Cutting edge obtuse,Unsuitable tool material. Increase cutting speed,Increase rake angle,Select small sticking force.

Product Tags:

Rcmt 0803 Mo Cnc Turning Tool Inserts Round Steel Carbide Cutting Inserts

Tungsten Carbide Inserts

Turning Carbide Inserts

CNC Carbide Inserts

Carbide End Mill

Flat End Mill

Carbide Ball Nose End Mill

Corner Radius End Mill

Carbide Milling Cutter

Milling Carbide Insert

Carbide Lathe Insert

Carbide Grooving Insert

Carbide Threading Inserts

U Drill Insert

Roughing End Mill

Thread End Mill

Chamfer End Mill

Tungsten Carbide Drill Bits

Rcmt 0803 Mo Cnc Turning Tool Inserts Round Steel Carbide Cutting Inserts

Rcmt 0803 Mo Tungsten Carbid Turning Carbide Insert Cnc Cutter Lathe Tool Round Steel

machining carbide inserts

carbide milling insert

carbide insert milling cutter